Free Spectral Range
   HOME

TheInfoList



OR:

Free spectral range (FSR) is the spacing in optical
frequency Frequency is the number of occurrences of a repeating event per unit of time. It is also occasionally referred to as ''temporal frequency'' for clarity, and is distinct from ''angular frequency''. Frequency is measured in hertz (Hz) which is eq ...
or
wavelength In physics, the wavelength is the spatial period of a periodic wave—the distance over which the wave's shape repeats. It is the distance between consecutive corresponding points of the same phase on the wave, such as two adjacent crests, t ...
between two successive reflected or transmitted optical intensity maxima or minima of an interferometer or
diffractive optical element Diffraction is defined as the interference or bending of waves around the corners of an obstacle or through an aperture into the region of geometrical shadow of the obstacle/aperture. The diffracting object or aperture effectively becomes a s ...
. The FSR is not always represented by \Delta\nu or \Delta\lambda, but instead is sometimes represented by just the letters FSR. The reason is that these different terms often refer to the bandwidth or linewidth of an emitted source respectively.


In general

The free spectral range (FSR) of a cavity in general is given by :\left, \Delta\lambda_\text\ = \frac\left, \left(\frac\right)^ \ or, equivalently, :\left, \Delta\nu_\text\ = \frac\left, \left(\frac\right)^\ These expressions can be derived from the resonance condition \Delta \beta L = 2\pi by expanding \Delta \beta in Taylor series. Here, \beta = k_0 n(\lambda) = \fracn(\lambda) is the wavevector of the light inside the cavity, k_0 and \lambda are the wavevector and wavelength in vacuum, n is the refractive index of the cavity and L is the round trip length of the cavity (notice that for a standing-wave cavity, L is equal to twice the physical length of the cavity). Given that \left, \left(\frac\right) \ = \frac\left (\lambda)-\lambda \frac\right= \fracn_g, the FSR (in wavelength) is given by :\Delta\lambda_\text = \frac, being n_\text is the group index of the media within the cavity. or, equivalently, :\Delta\nu_\text = \frac, where c is the speed of light in vacuum. If the dispersion of the material is negligible, i.e. \frac\approx 0, then the two expressions above reduce to :\Delta\lambda_\text \approx \frac, and :\Delta\nu_\text \approx \frac. A simple intuitive interpretation of the FSR is that it is the inverse of the roundtrip time T_R: :T_R = \frac = \frac. In wavelength, the FSR is given by :\Delta\lambda_\text = \frac, where \lambda is the vacuum wavelength of light. For a linear cavity, such as the Fabry-Pérot interferometer discussed below, L = 2 l, where L is the distance travelled by light in one roundtrip around the closed cavity, and l is the length of the cavity.


Diffraction gratings

The free spectral range of a
diffraction grating In optics, a diffraction grating is an optical component with a periodic structure that diffracts light into several beams travelling in different directions (i.e., different diffraction angles). The emerging coloration is a form of structur ...
is the largest wavelength range for a given order that does not overlap the same range in an adjacent order. If the (''m'' + 1)-th order of \lambda and ''m''-th order of (\lambda + \Delta \lambda) lie at the same angle, then :\Delta \lambda = \frac.


Fabry–Pérot interferometer

In a Fabry–Pérot interferometer or etalon, the wavelength separation between adjacent transmission peaks is called the free spectral range of the etalon and is given by :\Delta\lambda = \frac \approx \frac, where λ0 is the central wavelength of the nearest transmission peak, ''n'' is the index of refraction of the cavity medium, \theta is the angle of incidence, and l is the thickness of the cavity. More often FSR is quoted in frequency, rather than wavelength units: :\Delta f \approx \frac. The FSR is related to the full-width half-maximum δλ of any one transmission band by a quantity known as the ''finesse'': :\mathcal = \frac = \frac, where F = \frac is the ''coefficient of finesse'', and R is the reflectivity of the mirrors. This is commonly approximated (for ''R'' > 0.5) by :\mathcal \approx \frac = \frac{(1 - R)}.


References

Physical optics